چکش اشمیت دیجیتال مدل HT 225E
چکش اشمیت دیجیتال مدل HT 225E ساخت کمپانی PCE آلمان
این چکش اشمیت دیجیتال مدل HT 225E ساخت کمپانی PCE آلمان به همراه سنگ سمباده، کابل USB ، نرم افزار، کیف حمل است.
مشخصات فنی: انرژی سینماتیک اسمی: 2207 J ثابت فنر: 785 N/m انبساط فنر: 75 mm ±0.3 mm شعاع نوک کروی : 25 mm ±1 mm دارای پورت USB دارای نرم افزار دارای حافظه ذخیره 200
گروه داده ابعاد : 54 × 280 mm وزن : 1.1 kg
*** لازم به ذکر است که شرکت پترو پژوهش خاورمیانه ا نماینده انحصاری کمپانی PCE آلمان در ایران می باشد و خدمات پس از فروش و گارانتی را به مشتریان خود ارائه می دهد ****
Cement Testing Hammer PCE-HT 225E
leak-detector with digital camera / continuous measurement /
adjustable intensity 50 … 110 dB / battery operation / incl. report software
The digital cement testing hammer PCE-HT 225E is designed for measurements of compression resistance on cement and a non-destructive material testing to determine the cement quality. The digital cement testing hammer features an electric transformer which converts the number of rebounds into a measurement value, that is then shown on a display that is fully integrated into the cement testing hammer. Furthermore the USB interface of the cement testing hammer PCE-HT 225E allows a transfer of the measured data to a computer. Thus the operator can fully concentrate on the test results, instead of simultaneously generating a time-consuming protocol. Due to the software the developed data can be downloaded from the cement testing hammer within short time, in order to process those. By means of the digital testing hammer various parameters, e.g. lay direction, deformation factor, time factor, and carbonizing can be easily set. The digital cement testing hammer additionally features a digital voice which vocalizes the determined results in English. This facilitates testing on locations that are hard to reach so that the display cannot be seen during testing. If there are any questions about this Cement Testing Hammer PCE-HT 225E, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703 0. Our technicians and engineers will gladly advise you regarding all cement testers and all products in the field of measuring instruments, regulation and control and scales.
– Digital LCD display
– Digital voice function
– Incl. software for data processing
|
– USB interface
– Data storage for 200 values
– Non-destructive measurement
|
Cement Testing Hammer PCE-HT 225E
leak-detector with digital camera / continuous measurement /
adjustable intensity 50 … 110 dB / battery operation / incl. report software
|
The digital cement testing hammer PCE-HT 225E is designed for measurements of compression resistance on cement and a non-destructive material testing to determine the cement quality. The digital cement testing hammer features an electric transformer which converts the number of rebounds into a measurement value, that is then shown on a display that is fully integrated into the cement testing hammer. Furthermore the USB interface of the cement testing hammer PCE-HT 225E allows a transfer of the measured data to a computer. Thus the operator can fully concentrate on the test results, instead of simultaneously generating a time-consuming protocol. Due to the software the developed data can be downloaded from the cement testing hammer within short time, in order to process those. By means of the digital testing hammer various parameters, e.g. lay direction, deformation factor, time factor, and carbonizing can be easily set. The digital cement testing hammer additionally features a digital voice which vocalizes the determined results in English. This facilitates testing on locations that are hard to reach so that the display cannot be seen during testing. If there are any questions about this Cement Testing Hammer PCE-HT 225E, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703 0. Our technicians and engineers will gladly advise you regarding all cement testers and all products in the field of measuring instruments, regulation and control and scales.
|
– Digital LCD display
– Digital voice function
– Incl. software for data processing
|
– USB interface
– Data storage for 200 values
– Non-destructive measurement
|
|
Technical Specifications of the Cement Testing Hammer
|
Nominal cinematic energy
|
2,207 J (2,207 Nm)
|
Spring constant
|
785 N/m
|
Expansion of spring
|
75 mm ± 0,3 mm
|
Calibration value (to calibration norm)
|
80 ± 2
|
Radius of spherical tip
|
25 mm ± 1 mm
|
Interface
|
USB 2.0
|
Data storage capacity
|
for more than 200 values
|
Display
|
LCD, 176 x 220
|
Power Supply
|
4 x AAA alkaline batteries
|
Weight
|
1.1 kg
|
Dimensions
|
Ø 54 x 280 mm
|
|
|
Images of the Cement Testing Hammer PCE-HT 225 E
Images of the Cement Testing Hammer PCE-HT 225 E
|
Frontal view of digital cement testing hammer PCE-HT 225 E
|
The connections of the digital cement testing hammer PCE-HT 225 E incl. USB
|
Setting the impact angle on the display of the digital cement testing hammer
|
The digital cement testing hammer features a LCD display
|
The grindstone to even out rough surfaces, included in delivery content
|
The large delivery content of the digital cement testing hammer PCE-HT 225 E
|
Delivery Content of the Cement Testing Hammer PCE-HT 225 E:
1 x Cement Testing Hammer PCE-HT 225 E,
1 x USB cable
1 x software
1 x grindstone for rough surfaces
1 x transportation case,
1 x instruction manual
|