ULTRASONIC FLAW DETECTOR TRU-TESTER

 

با سيستم ديجيتال ساخت كمپاني NDT Supply

محصول سال 2009

مشخصات فني آن به شرح زير است:

 

FEATURES

High resolution large TFT color LCD display

Welding simulation map

Large thickness reading display

DAC curve with DAC alarm

+6dB DAC setting can extend set DAC sound path up to 200 mm full screen

Positive, negative, and minimum depth alarms

Filled waveform trace display

Freeze and Peak memory mode

Separately Gate A and Gate B setting with alarm

Echo-Echo for through coating thickness measurement

Peak or Flank measurement

RF display

Time-B-scan and encoder B-scan available

Single Pont probe auto zero calibration (incl. single contact and angle beam probe)

Pulse repetition frequency control

Displays sound path value, surface distance and depth to flaw in angle beam inspections

SPECIFICATIONS

Calibration range:

From 25 to 6000 mm (steel long).

Sound velocity:

2 fixed values(3230m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s.

Probe delay:

0 to 365 μs

Gain:

100dB, adjustable in steps of 0.1/2/6/12/20 dB

Fine Gain:

0.1 dB

Frequency range:

0.5-5 MHz narrow band, 4-15 MHz wide band

Pulse repetition frequency:

10-1000Hz, depending on the set calibration range and the probe delay for adjustable

Test methods:

Pulse echo mode and Thru mode

Pulse Voltage

400 V negative spike

Damping:

200 Ω

Echo presentation:

Full wave, RF

Suppression:

Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display

3

DAC:

Recording of up to 8 reference echoes, 40dB dynamic range, display of the DAC curve

3 or 4 DAC curve can be setting

Data storage:

500 A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function.

Units of measure:

mm or inch

Direct documentation:

Hardcopy (contents of display), active measurement reading, test report or thickness report, via the RS-232 interface to computer.

Interface:

RS-232 C (bidirectional) or USB adaptor for PC computer.

Analog output:

Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm

Probe connector:

Two LEMO 1 connectors ( BNC connector available )

Power supply:

Removable 8800mAh/7.2V Li-ion Battery or mains supply via an

external mains power/charger unit JBD15-A2S

Operational period:

Up to 5 hours with Battery ( select LCD low bright )

Battery charge indication:

On the display

Operating temperature:

-5o C to +65o C

Storage temperature:

-40o C to +75o C (without batteries)

Display size:

Screen: 103mm×86mm (W×H)

Dimensions:

140mm×220mm×42mm (H×W×T)

Weight:

2.0 Kg with battery pack

 

 

 

 

The Science of Nondestructive Testing

Elcometer inspection Equipment

colorimeter FRU

 FRU

manufacturer of colorimeter

exclusive agent

 

 

 

Flaw Detectors

Flaw Detectors:

STARMANS DIO 1000 SFE

STARMANS DIO PA

SONATEST D50-D10-D20

SIUI

Contact us

 ADD : 840/5 No 39 Sq Farjam St Reaslat Sq Tehran Iran

info@ppkgroup.co
 sales@ppkgroup.co
www.ppkgroup.co

 Telefax  :  +982177130687-8

+982177228679

JoomShaper