جستجو
منو
جستجو
ثبت سفارش
02177130687

بلاگ

خانهآرشیو

ضخامت سنج Olympus 45MG

admin
آرشیو آلتراسونیک پیشرفته Phased Array تجهیزات بازرسی فنی غیر مخرب ضخامت سنج اولتراسونیک

ضخامت سنج Olympus 45MG

Standard Features

ضخامت سنج Olympus 45MG

دستگاه ضخامت سنج Olympus 45MG ساخت امریکا با جدید ترین امکانات

ضخامت سنج فلزات،ضخامت سنج پرتابل،ضخامت سنج آلتروسونیکOLYMPUS،ضخامت سنج اولتراسونیک،ضخامت سنج

رنج اندازه گیری : از 0.08 تا 635 میلیمتر
اندازه گیری ضخامت :   فایبرگلاس، لاستیک، کامپوزیت و…
مدل :   45
کشور سازنده :   آمریکا
دقت اندازه گیری :  0.1-0.001mm
گارانتی :   دو سال
خدمات پس از فروش :  ده سال
کمپانی سازنده :    OLYMPUS

In its basic configuration the 45MG is a simple and straightforward gage that requires minimal operator training to tackle most common thickness gaging applications. With additional optional software options and transducers however, the 45MG can become significantly more advanced and take on applications well beyond that of a typical entry-level gage. Furthermore, most options are available individually at the time of purchase or can be added in the future as your needs change.

  • Compatible with full line of Olympus dual element transducers for thickness measurements on internally corroded metals
  • Min./Max. mode
  • Two Alarm modes
  • Differential mode
  • Time-based B-scan
  • Reduction Rate
  • Gain Adjust (standard, high, and low)
  • Password instrument lock


45MG with optional protective rubber boot and stand

Optional Features

From a simple corrosion gage to a multi-purpose precision thickness gage with only a few key strokes. The 45MG offers five code-activated software options that makes it one of the most versatile thickness gages in the industry.

  • Echo-to-Echo / THRU-COAT®: Using Echo-to-Echo, the true metal thickness is displayed and the thickness of the coating layer will be ignored. THRU-COAT measures metal and nonmetallic coating thicknesses, each adjusted for their correct sound velocities. There is no need to remove paint or coatings from surfaces.
  • Single Element: For very precise thickness measurements on many materials, including metals, plastics, composites, glass, and ceramics. Compatible with single element Microscan transducers ranging from 2.25 MHz to 30 MHz.
  • Single Element High Penetration: For thickness measurement on thick or highly attenuating materials such as fiberglass or cast metals. Compatible with single element Microscan transducers ranging from 0.5 MHz to 30 MHz. Included is the Single Element option.
  • Data Logger: The 45MG has a full-featured internal bidirectional alphanumeric data logger that is designed to easily store and transfer thickness readings and waveform data. Includes GageView™ interface program, a Windows-based application.
  • Live A-scan with Waveform Adjust: This optional Live A-scan mode allows users to view the ultrasound waveform (or A-scan) directly on the gage’s display, verify the thickness measurement, and make manual adjustments to gain and blanking settings to maximize measurement performance in challenging applications. This helpful option features Manual Gain Adjust, Extended Blanking, First Echo Blank, Range, and Delay.

Built for Tough Environments

  • Rugged, designed for IP67
  • Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL-STD-810G, Method 511.4, Procedure I.
  • Shock tested using MIL-STD-810G, Method 516.5, Procedure I, 6 cycles each axis, 15 g, 11 msec Half sine.
  • Vibration tested using MIL-STD-810G, Method 514.5, Procedure I, Annex C, Fig. 6, general exposure: 1 hour each axis.
  • Wide operating temperature range
  • Optional protective rubber boot with gage stand
 indoor a-scan display
Indoor display setting, optional A-scan mode

Designed for Easy Operation

  • Simple keypad for right hand/left hand operation
  • Easy operator interface with direct access to most functions
  • Internal and removable MicroSD memory card storage
  • USB communication port
  • Optional alphanumeric data logger with 475,000 thickness readings or 20,000 waveforms
  • Default/Custom single element transducer setups (optional)
  • Password protected instrument lock
  • Color transflective QVGA display with indoor and outdoor color settings for superior clarity

Outdoor display setting, optional A-scan mode

 

تلفکس فروش و ثبت سفارش :

 021-77130687-8

021-7722679

نوشته قبلی

ضخامت سنج آلتراسونیک Ge DMS GO

نوشته بعدی

ضخامت سنج اولتراسونیک SA40

نوشته های مشابه

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

بستن
برای دیدن محصولات که دنبال آن هستید تایپ کنید.